Functions of the Copper-Aluminum Tube Welding Production Line

Aug 01, 2026

Leave a message

Core Process Capabilities
Overcoming Technical Challenges in Copper-Aluminum Welding:Specialized processes-such as asymmetric power output, composite filler metal systems, and pulsed heating-compensate for the disparity in thermal conductivity between copper and aluminum. These methods inhibit the formation of brittle intermetallic compounds, keeping the interfacial reaction layer thickness at ≤5μm to prevent joint embrittlement and cracking.
High-Precision Temperature Control Ensuring Consistency: Equipped with a closed-loop temperature control module, the system maintains temperature fluctuations within ±3°C. This ensures highly uniform filler metal melting during mass production, resulting in a cold-weld rate of less than 0.3%-far superior to the industry average of 1%.
Strict Pre-welding Treatment Controls: Standardized processes-including grinding and activation for the copper side and alkaline/acid cleaning for the aluminum side-thoroughly remove the high-melting-point Al₂O₃ oxide layer from the aluminum surface, ensuring optimal wetting of the filler metal across the dissimilar metal interface.

 

Production Efficiency and Cost Optimization
Substantial Increase in Production Capacity: Single-shift capacity rises from 800 units (using traditional methods) to 3,500 units. The welding cycle time is reduced to 5–7 seconds per unit, boosting production efficiency by more than fourfold compared to traditional flame brazing.
Significant Reduction in Overall Costs: A single operator can manage three machines, cutting labor costs by 60%. Energy consumption is reduced by 38%, and in most scenarios, the equipment investment can be recouped within 6–8 months through increased production output.
Fully Automated Process Integration:The system supports integration with gantry robots for automated loading and unloading. PLC-based networked control reduces order changeover time from 4 hours to 20 minutes, meeting flexible production requirements for various tube specifications.

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!