Cleaning Cycles by Industry/Application
High-Pollution Industrial Settings: For operating conditions involving heavy dust or corrosive media-such as cement kiln waste heat recovery or biomass boiler flue gas heat exchange-clean every 1–3 months. In workshops with high airborne dust levels (e.g., textile drying lines, grain milling), perform surface inspections every –30 days and complete thorough dust removal every 30–60 days.
General Industrial Settings:For processes with lower pollution levels-such as standard chemical production, metallurgy, or power generation-clean every 3–6 months; for high-temperature, high-pressure steam systems, the interval should be shortened to 2–3 months.
Civil and Clean Environments: For residential air conditioning or heating systems, clean every 6–12 months; for HVAC systems in public spaces like shopping malls and office buildings, clean every 3–6 months; for standard low-temperature hot water heating systems, clean every 6–12 months.
High-Hygiene Environments: For heat exchange equipment in the food and pharmaceutical industries, a thorough cleaning is required every 1–2 months to ensure production safety.
Criteria for Adjusting Schedules
Immediate cleaning is required if the temperature difference between inlet and outlet water becomes abnormally large, system air resistance or pressure drop increases by more than 10%, or the dust accumulation on the fin surfaces exceeds 1 mm; this prevents a significant drop in heat exchange efficiency.
When handling high-viscosity, fouling-prone media (e.g., syrups, oils/greases), the cleaning cycle should be shortened to 1 month or less; conversely, for low-pollution conditions involving pure water or clean gases, the interval can be extended to over 6 months.
Routine maintenance can include weekly removal of surface dust and deep flushing every 3–6 months, with a comprehensive chemical descaling and pressure test performed annually during scheduled system shutdowns.
