Maintenance Of Cored Wire Equipment

Sep 02, 2026

Leave a message

Daily Basic Maintenance (Pre- and Post-Shift)
‌Pre-shift startup checks‌: Verify that all connections are secure and electrical grounding is intact; check the stability of the steel strip payoff stand and take-up reel to prevent wobbling during operation.
‌In-process inspections‌: Monitor for abnormal noises or vibrations; immediately stop the machine to investigate if roller rotation stutters or tension fluctuates, preventing minor issues from causing steel strip misalignment or breakage.
‌Post-shift thorough cleaning‌: Clear residual alloy powder and metal debris from the hopper, forming table, and roller gaps to prevent moisture-induced powder clumping that could jam drive components; wipe dust from the machine's exterior to prevent ingress into the motor and electrical control cabinet.

 

Weekly Lubrication and Maintenance
Apply the specified grade of lubricant to all drive bearings, gears, and chains, focusing on high-frequency moving parts like roller shafts and traction wheel shafts to minimize component wear caused by dry friction.
Check the tension of drive belts and timing belts; adjust or replace them promptly if looseness or cracking is detected to prevent slippage that could compromise cored wire forming precision.
Calibrate the vibration gap of the powder feeder and clear any clumped powder from the discharge outlet to ensure the filling weight per meter remains within acceptable tolerance limits.

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!