Key Equipment for Copper-Aluminum Tube Welding Production Lines

Aug 03, 2026

Leave a message

Surface Pre-treatment Equipment
‌Copper-side Activation Station‌: Integrates a 120-grit automatic grinding mechanism and a 5% sulfuric acid activation bath; controls the welding surface roughness to Ra ≤ 1.6μm, generates a CuSO₄ transition layer conducive to filler metal adhesion, and thoroughly removes surface oxides and oil contaminants.
‌Aluminum-side Oxide Layer Removal Station‌: Equipped with a 10% NaOH alkaline cleaning bath (maintained at 60°C) and a mixed-acid pickling unit (20% HNO₃ + 5% HF); precisely breaks down the Al₂O₃ oxide layer (melting point 2,054°C) to create a microscopically roughened, activated surface.

 

Core Welding Units
‌High-Frequency Induction Brazing Machine‌: Standard models feature 5–30 kW power and 30–100 kHz frequency; utilizes an asymmetric power output module (40% power to copper side, 60% to aluminum side) to maintain a temperature differential within ±20°C; completes brazing for tubes under Φ30mm in 5–7 seconds, offering 40% higher thermal efficiency than flame brazing.
‌Specialized Copper-Aluminum Resistance Butt Welder‌: Uses IGBT inverter control with current regulation precision within ±1%; supports a three-stage independent current cycle (preheat, main weld, temper); features a servo-driven pressure mechanism with a response time ≤ 30ms; achieves solid-state metallurgical bonding without filler metal; cycle time ≤ 4.2 seconds per piece.
‌Polymer Diffusion Welder‌: Employs molecular-level thermocompression diffusion technology; achieves weld strength exceeding 95% of the base material; suitable for high-precision applications such as new energy vehicle battery cooling tubes and copper-aluminum transition busbars; joint resistivity is lower than 0.02 μΩ·cm.

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!