What raw materials are required for a copper-aluminum tube welding production line?

Aug 12, 2026

Leave a message

Core Base Materials
These are the fundamental input components for the production line, directly determining the final product's application scenarios:

‌Copper Tubes‌: Commonly used grades include T2 and TP2; typical specifications range from Φ6–30mm in diameter with wall thicknesses of 0.8–2mm. Surfaces must be free of oil and significant scratches. These form the copper section of the piping used in refrigeration and new energy systems.
‌Pure Aluminum/Aluminum Alloy Tubes‌: Commonly used grades include 1060 and 3003; specifications match the copper tubes, with wall thicknesses of 1–2.5mm and uniform surface oxide film thickness. These form the aluminum section of the piping, meeting requirements for lightweight design and cost-efficiency.

 

Core Brazing Consumables
These are the key media for achieving a metallurgical bond between dissimilar metals (copper and aluminum), directly determining weld joint performance:

‌Specialized Copper-Aluminum Brazing Filler‌: Mainstream choices include Al-Si-Cu-Ni series (e.g., 4047 Al-Si) filler with a melting point of 560–580°C; alternatively, ALCU-Q303 low-temperature rods (melting point 480–500°C) may be used, as they contain built-in flux and require no additional flux application.
‌Specialty Filler Types‌: Depending on specific operating conditions, options include HL201 (Cu-P binary), L209 (Ag-P-Cu), or CuSnTi (Cu-Sn-Ti powder) fillers to suit various tube diameters and strength requirements.
‌Composite Filler Structures‌: Mass production lines often incorporate a 0.1mm-thick pure copper foil interlayer to create a "copper foil + brazing strip" sandwich structure, which inhibits the formation of brittle phases at the copper-aluminum interface.

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!